Make a utensil rack with cans

Make a utensil rack with cans

It is always nice to showcase your table when you receive the visit. From tin cans, here's how to create a cookware rack in a classic vintage look.

Material to collect

Drill;
1 closing handle;
6 wood screws with round heads;
6 clean cans of the same size;
All purpose spray paint in semi-gloss white finish;
Pine plate 3 wide cans (allow for a slight excess) and about 1 ½ inches higher than the cans.

Steps

1-Clean the cans;

2-Cut the pine plate to the right size according to the selected preserves;

3-Spray the cans inside and out with the spray paint. Three layers will be needed and the 
drying time between each layer is about 30 minutes. Better to spray at a distance of 30 centimeters to avoid backstage and paint should be applied in a ventilated area or outdoors;

4-Spray the pine plate lightly with the spray paint to preserve the wood effect;

5-Place 3 preserves on each side of the wood plate and secure them with a drill and round-head wood screws screwed diagonally;

6-Install the handle on the field of the pine plate. Better screw it by hand since the field is fragile and could crack.